We have Local, Recommended Patio Door Tradesmen throughout Nottinghamshire

FindaTrade Ltd. takes the hassle out of finding a recommended Patio Door Tradesman in Nottinghamshire. Review their ratings, references, qualifications and insurances – Stay in control – select how many estimates and when you want them, then choose the best!

To get started simply complete the Start my Job box below or click the Post My Job button and we will get local Nottinghamshire Patio Door Tradesmen to contact you - It's quick, it's easy and best of all it's completely FREE!

Post a job

Let us help you find the right Tradespeople!

Start my Job

Job Location

I require estimates for...

Post a Job overview

Select your Location:

Change Trade Category:

Selection of completed Carpenter/Joiner Jobs

I have a tiled kitchen floor, approx 3.5 x 3m apart from units. The floor itself is wooden. I want the floor checked as it was drafty at floor level last winter, and I think there must be a hole under one of the units. I want under tile electric heating installed, not as prime heating, but so it is warm to walk on. I want it tiled over. I expect the existing tiles will have to be removed before work starts, but you should be able to tell me.
Hello I need bedroom furniture fitted I have wardrobes from IKEA with hinged doors 2 are 50cm wide x 236 high and 2 are 100cm wide by 236cm. But I have just discovered that our ceiling to floor differs from 237 to 234 and of course the part I measured was the highest part before buying them. Could someone possibly trim them down to fit? I have them at home ready to go up. Thank you
I have garden decking that was layed 3 years ago, and the decking boards were pressure treated. About 18 months ago I had it stained with Cuprinol protective decking stain and it has since started to peel off. I contacted Cuprinol customer service who advised that it could be the extreme winter conditions we had, and advised decking oil would be better to use. However I require the decking to be sanded down to it's original state and then re-treated
Steps are not that save for children too many steps down from the front door i want to put the steps sideways with a rail
I am looking for somone to remove existing worktops and fit new supplied with sink cutout and hob, and make good.
Create new doorway in existing stud wall. Fit frame and door and fit with security lock.
To supply and fit double wooden gate to side of house.
I want a single (small worktop replaced). It has a single round sink (plus a hole for the tap) and a hob to be cut out. I want it supplied and fitted please. I would love granite but it's probably too expensive. I'll go for a decent looking laminate. Thanks!
I would like underlay and flooring and beading fitted.the lounge and hallway is in total 28.4sq meters
Complete bedroom make over, design ideas welcome, wardrobes to be made and fitted.

A small selection of our many Patio Door Tradesmen in the UK

M James Carpentry Chichester
I am a time served carpenter and joiner, starting in wood machining and joinery for 4 years then moving on to carpentry 10 years ago. I specialize in bespoke solutions to your ideas and needs. I'm willing to discuss at any length to make sure the best...
Craft Interiors Staffordshire
Over 15 years experience in the carpentry, building and shopfitting services. I have worked all over the country in the retail, commercial and domestic sector. Locally fitting kitchens, Upvc windows to houses and schools, laying floors, hanging...
It will cost you nothing to have a reliable Electrician/Plumber/Boiler Engineer call to your door, equipped with loads of experience, honesty and a desire to help. Contact us for a free estimate or a quick response to an emergency leak, heating or...
Stanley home improvements has been up and running for a year now due to a lot of sub-contracting. I've now decided to branch out and go on my own. At Stanley home improvement we can provide all kinds of services such as plumbing, bathroom/kitchen fitting,...
We are fully qualified tradesmen who have been working in the building trade for over 20 years, and can handle all types of commercial and domestic property maintenance. Plumbing,Plastering,Fitted kitchens,Bathrooms,Flooring, Roofing,fencing,Upvc windows...
Cnc is a company owned by myself (Chris), which was set up back in 2002. I am a carpenter/joiner by trade in advanced craft and have a city and guilds qualification. As well as this I have over 25 years in the industry and have become extremely competent...
BPrime London
Hi! I am a time served builder with 15 years experience, trough my career I have slowly progressed trough trades like painting and decorating, plastering, drylining, carpentry. I have also touched matters on plumbing and electrics. My main occupation...
Style Interiors has been established over 11years. All are trades have city and guilds with time served. As a company we can under take small works to full refurbs suppliers of kitchens and bathrooms we are able to supply design and fit these at a discounted...
Please select
https://www.findatrade.com/
https://www.findatrade.com/images/