We have Local, Recommended General Fitters throughout Tyrone

FindaTrade Ltd. takes the hassle out of finding a recommended General Fitter in Tyrone. Review their ratings, references, qualifications and insurances – Stay in control – select how many estimates and when you want them, then choose the best!

To get started simply complete the Start my Job box below or click the Post My Job button and we will get local Tyrone General Fitters to contact you - It's quick, it's easy and best of all it's completely FREE!

Post a job

Let us help you find the right Tradespeople!

Start my Job

Job Location

I require estimates for...

Post a Job overview

Select your Location:

Change Trade Category:

Selection of completed Carpenter/Joiner Jobs

I have garden decking that was layed 3 years ago, and the decking boards were pressure treated. About 18 months ago I had it stained with Cuprinol protective decking stain and it has since started to peel off. I contacted Cuprinol customer service who advised that it could be the extreme winter conditions we had, and advised decking oil would be better to use. However I require the decking to be sanded down to it's original state and then re-treated
I am looking for 6 doors to be made. They have to match the Premdor, Interior 2 panel moulded door with straight top as to be seen at Jewson. It is for 3 sets of double doors, panel below, top is glass. Measurements of double doors are: 1400 x 2400 (pre screed, so roughly 231, 5) 1388 x 2400 (Pre screed) 1210 x 2400 Single doors (wood or mdf) 930 x 2400 840 x 2270 (this need to be a firedoor, can be a plain door) 595 x 1980 Doors need to be painted
Looking for decking in back garden not exactly sure of what size required yet waiting for advice.
I need internal doors to be supplyed and fitted. I require the job to be carried out asap
I am looking for a tradesperson to fit kitchen total area 4.14 m2 2 lengths @ 4.1m x 600 mm laminated worktop.
Kitchen Fit in BL9 Bury walmersly
To install approx 10 units and 2 worktops into an empty kitchen, units will be already assembled. Require bolted joints on worktops.
I am looking for a tradesperson to replace banister on stairs, supply spindles etc and to fit.
I've ruined my decking. I pressure washed it which took off some of the top layers of wood, I kept going, then got worried so I stopped, then when it was dry I applied natural decking oil which has only made the streakiness and discolouration worse. I think it looks awful! I wonder if it is possible to turn over the decking planks to the other side? The decking is only a year old and I wish I had left well alone but it was showing dirt and had been told it needed yearly maintenance and application of a preservative - and could be powerwashed. I prefer the other side anyway - I think it would be easier to maintain longterm - and I have learned my lesson not to pressure wash again. I don't think it would be difficult to turn over the planks because you can still see the screws. Thanks, Bernadette
Door (15 glass panels) on rising butt needs top hinge removing and replaced in a different part of the frame, as the frame at the existing hinge fitting is no longer holding the hinge properly. Also, a deadlock night latch (I already have) to be fitted to a front door. The whole job should take around 3 hours, so local fitter would be preferable.
2 WARDROBES to be built around chimney breast. Alcoves measure 46in & 44.5in Depth of alcove 13in so would need to build out to about 20/21. Floor to ceiling 9ft internal rails and cupboard above in both. Would like some kind of beading on doors to match Victorian age of property.

A small selection of our many General Fitters in the UK

16 years of experience, ranging from carpentry, general building, patios, kitchen fitting, bathroom fitting, painting and decorating. Too many skills to list, 9 years experience in and around oxfordshire and 7 years in and around london. I get...
At Cappo Home Solutions Limited we offer homeowners a complete range of services at competitive prices. With over 20 years electrical installation, consultancy, and project management experience, Cappo Home Solutions can offer anything from handyman...
I cover all aspects of plastering & drylining, ie skimming walls & ceilings, float & set, rendering, tacking, tape & joint dot & dab metal stud, soundproofing, all relevant plasterboard work and wall rebuilding. I have 25 years plus experiance...
We are a third generation family run building company. We are old enough to have experience and young enough to appreciate modern methods. We constantly strive to be the best in our field. All our tradesmen are fully qualified in there field. We know...
Our company have been going for seven years now and we take great pride in every job we do. Qualified for carpentry and plastering only but we also have our own qualified contacts for plumbing and tiling, all our jobs are done to very high standards,...
Our company provides all building and maintenance services from small repairs, decoration, plastering etc. to extentions, loft conversions, and new builds. Our staff have a wide variety of skills and are all experts in their particular trades....
Gas Safe registered and NAPIT registered for gas electrical, heating, plumbing, ventilation work. New or complete refurbishment of kitchens, bathrooms, bedrooms. Installation of central heating systems, replacement boilers, landlord gas...
Hello my name is Matthew and I have been a Carpenter and Joiner for 23 years, I have worked all over the world in the building trade and like to think I can bring a lot of my experience gained to your specific job. Punctuality, finishing, cleanliness...
Please select
https://www.findatrade.com/
https://www.findatrade.com/images/