Metal Working in TF3 in Telford / shropshire

Similar Jobs

• Metal Gate Repair in TF3Telford
  Small wrought iron metal gate, needs to be re-fitted due to having new slabs put down and it needs to be repositioned higher so it doesn’t drag on the slabs.
• Metal Gate Installation in TF3Telford
  Hi, I require a pair of gates fitted to my property. I require metal ones approx 6ft high & 4ft each. They require a robust secure fastening & locking system, And a securing to the house of one side...
• Metal Gate Installation in TF2Telford
  I would like a metal gate fitted at the side of my house to replace a wooden gate that’s falling apart. I also need it to be measured up.
• Welding in TF2Telford
  Need floor pan welding on my car, I have a welder if you want to use. Size measures 500mm x 800mm.
• Metal Gate Installation in TF1Telford
  I am looking for the supply and installation of a galvanised 5, 6 or 7 bar farm gate preferably with mesh. At present I have a 18' width driveway with a sturdy wooden post at each end. This is for a...
• Metal Gate Installation in TF1Telford
  Double gate required. One gate post is in place, the other needs to be constructed.
• Banister (metal) in TF1Telford
  Replace banister with hand rail on stairs and landing. Possibly fitting a handrail on opposite wall. Open to considering wood metal or glass subject to price. If wood then oak effect finish or...
• Metal Gate Installation in TF1Wellington
  wrought iron gate to fit into passage entrance total width 3ft approx by 5 or 6ft there are brick walls ether side for mounting.
• Metal Gate Installation in TF1Telford
  Hello I would like two gates fitted. Preferably galvanised gates if possible. A small one for my mums new home to go across the front entrance to her house and a larger one (6ft) to go down the side...
• Metal Gate Installation in WV3Wolverhampton
  New brick wall and pillars just been built. I have a aluminium gate which I want fitting with associated hardware to enable gates to slide.
• Metal Garage Door Installation/Repair in WV6Wolverhampton
  I would like to recess my garage door by 1.5 metre into the garage, to allow for my 2 cars to be placed on the drive.
• Metal Gate Installation in SY3Shrewsbury
  Fit a small gate on front drive already have gate just neee it fixing to brickwork.
• Metal Gate Installation in WV6Whitmore Reans, Wolverhampton
  Hello, I'm looking for someone to supply and fit a small front garden gate. I prefer something that is not prone to rot or rust. No posts are required. I've not moved into the property as yet but you...
• General Welding Work in WV2Wolverhampton
  I would like some quotes for decorative/ bow top metal fencing and 2 single gates to go around the front of my property in Wolverhampton.
• Metal Gate Installation in WV11Wolverhampton
  after a metal gate either steel/metal frame with wood or composite infill or solid metal and fitting (posts required as existing wooden splitting) . would need lock. to fit gap (between current posts )...
• Metal Working in ST21Eccleshall
  I would like a wall mounted pot rack made for hanging kitchen utensils above my cooker. It would be about 170cm long, with about 10 fixed prongs or hooks to hang colanders and frying pans from. It would...
• Welding in WV14Bilston
  Y reg Renault master van requires welding. Several areas require attention.
• Metal Gate Installation/Repair in WV14Wombourne
  To supply and fit 2 sets of electric gates to driveway- if electric gates are a problem manual gates are an option.
• Banister (metal) in WV13Willenhall
  Need a banister/handrail fitting outside the front steps of our home. There are 5 steep steps. Needs banister on just the one side.
• Metal Gate Installation in WV13Willenhall
  Need a gate for the front entrance to our house. Metal and Victorian style would be preferred as this would match the style of our home.
• Metal Working in WS6Birmingham
  Hi, the work is DDA spec handrails, all powdercoated ... I would be looking for a company to supply and fit , all work in birmingham area and lots of it, worked out on a linear metre rate.
• Metal Garage Door Repair in WV13Willenhall
  ...
• Metal Garage Door Repair in WS6Walsall
  Metal garage door approximately 25 years old needs repairing or replacing. The door opens/closes but the automatic mechanism for easy opening does not work at all.
• Metal Gate Installation in WV12Willenhall
  I am looking for someone to supply and fit 6' gates for my home. I will also need posts to be fitted. Unfortunately, I do not have measurements as I do not know how to do this accurately. Therefore I...
• Outbuilding Construction/Renovation in WS11Hednesford staffs
  I am purchasing a metal shed 10x8 Could you quote me for construction Please
• Conservatory (metal) Repair in DY8Wollaston, stourbridge
  I have recently had a conservatory built and I am worried about it being a sound structure.
• Welding in WS12Hednesford
  welding required on a 1953 ford truck cab and bed cab needs a panel welding in some floor work the bed needs a new edge
• General Welding Work in WS12Heath Hayes cannock
  Need jaguar x300 diecast manifold welded as that have cracks in them.
• Metal Gate Installation in WS2Walsall
  We need a gate in our back garden there's a gap of 128cm width 200cm length that needs fillin overall
• Metal Gate Repair in TF9Norton In Hales
  I need a piece of metal welding to the gate fastener to allow it to close properly. I reckon it's a fairly quick job.
• Metal Gate Installation in DY8Stourbridge
  Looking for a metal gate with padlock to be suppied and fitted, approx 1 & half car widths wide and approx 2 metres high for our car park.
• Welding in ST15Stone
  I have a 2004 Jaguar x type that has a small repair required to the near side sill. The sill cover has been removed and the corrosion has been cut out to good metal leaving a repair patch of 15cm x 10cm....
• Metal Gate Installation in WS11Cannock
  New back gate and post needed wooden at the moment but would consider metal Not sure of size
• Metal Gate Installation in WS3Walsall
  I need new driveway gate. 13 ft double driveway gates - wrought iron. Thank you in advance.
• Metal Garage Door Repair in DY9Wollescote, stourbridge
  We have a roller shutter type door operated by a fob. The unit that controls the door refuses to work and makes loud clicking noises.
• Metal Gate Installation in WS10Wednesbury
  I would like 4 metal driveway gates. 3ft by 45 inches wide each. Thank you
• Metal Gate Repair in ST15Stone
  Hello I have a metal gate frame with wooden inner which hinges onto a metal upright post. The hinges on one gate has been pulled off when the wind blew the gate the wrong way. I need the gate hing repairing...
• Metal Gate Repair in B69Oldbury
  Industrial gate that was hit by a lorry. gate has dropped and the post will need digging out and reinstating. Already quoted once, but company failed to turn up on date agreed. May be some groundworks/kerb...
• Metal Gate Installation in B71West Bromwich
  To supply and fit single metal gate to front of house and matching side gate.
• Metal Gate Repair in DY11Kidderminster
  Repair a metal single pedestrian garden gate, top x 2 bolts in vertical timber affixed to inside of brick archway has rotten, bottom fixings are still in place but timber has broken
• Metal Window Repair in B70West bromwich
  Metal windows need rubbing down and rust removed and then repainted. Small cracked leaded panes need replacing.
• Metal Gate Repair in B71West bromwich
  damage to wrought iron gate and post and driveway by west midlands ambulance / their insurer has requested quotes for repair of damage
• Metal Gate Installation in WS5Sandwell/west Midlands
  Black metal spiked gated wanted with privacy back black out and supplied and fitted
• Metal Staircases Installation/Repair in B71West bromwich
  I have existing external fire exit staircase to be moved to the side of the building
• Metal Staircases Installation/Repair in WS7Burntwood
  Fire escape staircase required, supplied and fitted as soon as possible, quotes required
• Metal Gate Repair in B71West bromwich
  Latch has broken off small front metal garden gate. Anyone able to repair please?
• Metal Shutters Repair in B65Blackheath
  We have a large, strengthened glass commercial door on a metal frame. We need this repaired as it is catching on a plate on the floor or against part of the frame. Also the door has a door closer, we...
• Metal Gate Repair in B62Halesowen
  To repair parts of gate that is rusted as the bottom bits of the gate maintained by previous owner is starting to rot.
• General Welding Work in ST15Stone
  I have an aluminium wheel and hub that have become separated and require a small weld to join them. The wheel is of a small kit trolley and has no health and safety issues.
• Welding in WS9Aldridge
  I require 2 new gate frames to replace existing. Each frame is 1495mm wide, 1600mm high with central horizontal support rail. Probably made from welded together box section (galvanised?) steel.